Skip to main content
This article provides guidelines on how to change the front turn signal on a Mazda 5, model years 2010 through 2018. 

The instructions are the same for both driver's and passenger's side turn signal light bulbs. The turn signal may also be referred to as the blinker.

Table of Contents


What you will need


  1. Park the Mazda 5 on level ground. Turn off the engine, move the shifter to Park and get ready to change the front turn signal light bulb on your Mazda 5.

  2. Open the hood by pulling the hood release under the dashboard.
  3. Determine the location of the bulb that has burned to replace turn signal on a Mazda 5 2010 2011 2012 2013 2014 2015 2016 2017 2018
  4. Access the back of the Mazda 5 headlight. In some cases, it may be easier to remove the headlight, but for Mazda 5, it is not necessary.

  5. Replace the light bulb.
  6. Reinstall the turn signal socket into the headlight assembly of your Mazda

If the front turn signal doesn't work after you install a new bulb, check the fuses.

The fuse for the front turn signal lights is located in the engine compartment fuse box. Check the 10A fuse market as HAZARD. The fuse position is 24.