Skip to main content
Guide on how to replace the sway bar link on a Nissan Sentra 2013-2019.

Table of Contents

Watch Video

What you will need

Procedure

  1. Park, the vehicle on a flat ground surface, set the shifter in park, and turn off the ignition.The Nissan Sentra 2019.

     

  2. Loosen the lug nuts of the front wheel by using a lug wrench. Then jack up the vehicle's front and support it with jack stands.
  3. Remove the lug nuts and pull the wheel out from the vehicle to have wider access to the sway bar link.Removing the front wheel of the Nissan Sentra.

     

  4. The sway bar link is located on the suspension system and is parallel to the strut assembly of the vehicle.The sway bar link of the Nissan Sentra.

     

  5. Remove the 19mm bolt on the bottom part of the sway bar link using a 19mm socket. If the bolt is spinning when loosened, use an Allen wrench to hold and prevent it from turning.Removing the 19mm bolt on the bottom part of the sway bar link.

     

  6. Remove the 19mm bolt on the top part of the sway bar link using a 10mm socket. If the bolt is spinning when loosened, use an Allen wrench to hold and prevent it from turning.Removing the 19mm bolt on the top part of the sway bar link.

     

  7. Once the bolts have been removed, pull the sway bar link out from the vehicle.Removing the sway bar link of the Nissan Sentra.

     

  8. Line up the new sway bar link to the vehicle.Installing the sway bar link of the Nissan Sentra.

     

  9. Reinstall the 19mm bolts using the 19mm socket and tighten them with their proper torque specification.Reinstalling the bolt on the sway bar link.

     

    Reinstalling the bolt on the sway bar link.
  10. Line up the front wheel back to the vehicle and reinstall its lug nuts using the lug wrench.Reinstalling the front wheel of the Nissan Sentra.