Skip to main content
Step-by-step procedure on how to replace the interior light bulbs on a Ford Fusion 2013-2020. You will learn how to replace the interior light (front) and dome light (rear).

Table of Contents

Watch Video

What you will need

Procedure

  1. Remove the cover on the back part of the map light by pulling it out.Removing the cover on the back part of the dome light.

     

  2. Press the map light compartment to open it. Opening the map light of the Ford Fusion.

     

  3. Locate the clips inside the map light assembly.The location of the clips inside the map light assembly.

     

  4. Push the clips to pop out the map light. Use a flat screwdriver or a pick tool to easily push the clips inside.Pressing the clips inside the map light assembly.

     

    Pressing the clips inside the map light assembly.
  5. Disconnect the electrical connector of the map light by pressing the clip and pulling the connector out.Disconnecting the electrical connector of the map light assembly.

     

    Removing the map light assembly of the Ford Fusion.
  6. Install the new dome light by connecting the electrical connector.Connecting the electrical connector of the new map light assembly.

     

  7. Line up the map light and press it in until it snaps into place.Installing the new map light assembly of the Ford Fusion.

     

    Installing the new map light assembly of the Ford Fusion.
  8. Line up the cover on the back part and push it in to set it into place.Installing the cover on the back part of the map light assembly.

Replace Rear Dome Light

  1. Locate the dome light on the back.The dome light of the Ford Fusion.

     

  2. Pop-out the front part of the dome light using a prying tool.Poping out the front part of the dome light.

     

  3. Slide the dome light towards the front to fully remove it.Removing the dome light of the Ford Fusion.

     

  4. Disconnect the electrical connector by pressing the clip and pulling the connector out.Disconnecting the electrical connector of the dome light.

     

    Removing the dome light of the Ford Fusion.
  5. Connect the new/replacement dome light.Connecting the electrical connector of the new dome light.

     

  6. Line up the back part of the dome first.Placing the back part of the dome light.

     

  7. Push the front part of the dome light to lock it into place.Pushing the front part of the dome light to set it into place.

     

  8. Test the new map light and dome light by switching them on.