Skip to main content
Guide on how to add windshield washer fluid on a Kia Sedona 2015-2021.

Table of Contents

Watch Video


  1. Park the vehicle in a safe location, place the transmission in Park and turn off the ignition.
  2. Open the hood. Pull the hood release under the dashboard and unlock the hood latch on the vehicle's front. Then pull the hood up and secure it open using the hood strut.Pulling the hood release of the Kia Sedona.



    Unlocking the hood latch of the Kia Sedona.
  3. Locate the windshield washer fluid reservoir on the passenger side of the engine compartment.The windshield washer reservoir of the Kia Sedona.


  4. Open the cap by pulling it up.Opening the windshield washer reservoir.


  5. Then add windshield washer fluid until the level reaches two inches below the cap. 

Adding windshield washer fluid to your Kia Sedona is easy and often is one of those maintenance items that you might overlook. Using water as a substitute is not recommended especially in the winter months. Water will freeze in the lines and can cause them to break.  Do not use engine coolant as a substitute for windshield washer fluid.