Skip to main content
Guide on how to replace the headlight assembly on a Nissan Rogue Sport 2017+.

Table of Contents

Watch Video

What you will need

Procedure

  1. Remove the front bumper. If you need help with this step, follow these procedures for the removal and installation process of the front bumper.
  2. Loosen the 10mm bolt below the headlight assembly by turning it counter-clockwise using a 10mm deep socket.Loosening the 10mm bolt below the headlight assembly.

     

  3. Remove the three 10mm bolts holding the headlight assembly by turning them counter-clockwise using a 10mm socket.Removing the three 10mm bolts holding the headlight assembly.

     

  4. Pull the cable clip attached below the headlight assembly. Use a pick tool to pull the clip at the lower part of the headlight.Pulling the cable clip attached to the headlight assembly.

     

  5. Remove the headlight assembly from the vehicle by pulling it out.Pulling the headlight assembly out from the vehicle.

     

  6. To fully remove the headlight assembly, disconnect the electrical connectors behind it and pull the cable line clips out from the headlight assembly.Disconnecting the cables out from the headlight assembly.

     

  7. Carry the new headlight assembly near the vehicle.
  8. Connect the electrical connectors of the light bulbs by pushing them into their connection ports and push the cable clips back to the headlight assembly.Connecting the electrical connectors into the new headlight assembly.

     

    Pushing the cable clips back to their original position.
  9. Line up the new headlight assembly to the vehicle and press it in to set it into place.Installing the new headlight assembly of the Nissan Rogue Sport.

     

  10. Reinstall the three 10mm bolts holding the headlight assembly. Turn the bolts clockwise using the 10mm socket to tighten.Reinstalling the 10mm bolt holding the headlight assembly.

     

  11. Tighten the 10mm bolt below the headlight assembly by turning it clockwise using a 10mm deep socket.Tightening the 10mm bolt below the headlight assembly.

     

  12. Reinstall the front bumper. If you need help with this step, follow these procedures for the installation process of the front bumper.