Skip to main content
Guide on how to replace the daytime running light assembly on a Kia Forte 2018-2022.

Table of Contents

Watch Video

What you will need

Procedure

  1. Remove the front bumper. If you need help with this step, follow these procedures for the removal of the front bumper.

     

  2. Or remove the engine splash shield. Remove the push clips around the engine splash shield using a flat screwdriver. Then remove the four front bolts and three back bolts on the engine splash shield using a 10mm socket.Removing the engine splash shield of the Kia Forte.

     

  3. Disconnect the electrical connector of the light bulb by pressing the clip and pulling the connector out.
  4. Remove the three screws on the lamp by turning the screws counterclockwise using a Philips screwdriver.The screws holding the fog light and daytime running light lamp.

     

  5. Pull the lamp out of the front bumper.Pulling the lamp out of the front bumper.

     

  6. Line up the new fog light and daytime running light lamp.The new fog light and daytime running light lamp of the Kia Forte.

     

    Installing the new fog light and daytime running light lamp of the Kia Forte.
  7. Reinstall the three screws by turning them clockwise using a Philips screwdriver.Reinstalling the screws holding the lamp.

     

  8. Reconnect the electrical connector of the light bulb.
  9. Reinstall the front bumper. If you need help with this step, follow these procedures for the installation of the front bumper.Reinstalling the front bumper of the Kia Forte.