2018+ Kia Forte Backup Light Bulb Replacement

What you will need

• Floor Jack
• Jack Stands
• Light Bulb 921
• Philips Screwdriver
• Flathead Screwdriver
• Mechanic Metric Toolset
  • 10mm Socket
  • 11mm Socket

Procedure

1. Jack up the vehicle's back and support it with jack stands.
2. Remove the screw on the rear wheel well by turning it counterclockwise using a Philips screwdriver.

    

   
3. Remove the two push clips on the rear wheel well by pulling them out using a flat screwdriver.

    

4. Remove the two 10mm bolts on the plastic shield below the rear bumper. Turn the bolts counterclockwise using a 10mm socket to remove them.

    

5. Remove the four push clips on the plastic shield by pulling them out using a flat screwdriver.

    

6. Remove the 11mm bolt on the back of the plastic shield by turning it counterclockwise using an 11mm socket.

    

7. Pull the edge of the bumper to have wider access to the socket of the backup light.

    

8. Pull the plastic shield down to have access to the socket of the backup light.

    

9. Reach inside the vehicle and remove the socket from the assembly by twisting it counterclockwise and pulling it out from the lamp.

    

10. Pull the light bulb out from the socket.

     

11. Insert the new light bulb into the socket and press it in to set it into place.
12. Place the socket back to the assembly and twist it clockwise to lock in position.
13. Press the rear bumper back to its proper position.
14. Line up the plastic shield below the rear bumper. Then reinstall the push clips and bolts to set the plastic shield in position.
15. Reinstall the screw and two push clips on the rear wheel well of the vehicle.