Skip to main content
Guide on how to replace the turn signal light bulb of the Kia Forte 2018-2022.

Table of Contents

Watch Video

What you will need

Procedure

  1. Jack up the vehicle's front and support it with jack stands.

    Jacking up the vehicle and supporting the vehicle with jack stands.

     

  2. Remove all the push clips on the front and back of the engine splash shield. Use a flat screwdriver to remove the push clips.

    Removing the push clips holding the engine splash shield.

     

  3. Remove the four 10mm bolts on the front and three 10mm bolts on the back of the engine splash shield. Use a 10mm socket to remove the bolts.

    Removing the 10mm bolts on the engine splash shield.

     

  4. Locate the socket of the light bulb behind the turn signal light assembly.

    The socket of the turn signal light.

     

  5. Turn the socket counterclockwise and pull it out from the lamp to remove it.

    Pulling the socket out of the turn signal light assembly.

     

  6. Turn the light bulb to the left and pull it out from the socket.

    Removing the Turn Signal Light of the Kia Forte.

     

  7. Install the new light bulb. Press the light bulb into the socket and turn it clockwise to lock it in position.

    Installing the new Turn signal light bulb of the Kia Forte.

     

  8. Line up the socket back to the turn signal light assembly and turn the socket clockwise to lock it in position.Reinstalling the socket back to the turn signal light assembly.
  9. Line up the engine splash shield back to the vehicle
  10. Reinstall the push clips and bolts of the engine splash shield.Reinstalling the engine splash shield of the Kia Forte.