Skip to main content
Step-by-step procedure on how to add windshield washer fluid on a 2013-2018 Mazda 3.

Table of Contents

What you will need

Procedure

  1. Unlock the vehicle and pull the hood release under the dashboard.Pulling the hood release to pop out the hood.

     

  2. Locate the hood latch on the vehicle's front and slide the tab to the right to unlock it.Sliding the tab to unlock the hood latch.

     

  3. Pull the hood up and set the hood strut to hold the hood up.Setting the hood strut to hold the hood.

     

  4. Locate the windshield washer reservoir on the passenger side of the engine compartment.The windshield washer reservoir of the 2016 Mazda 3.

     

  5. Open the cap by pulling it up.Opening the windshield washer reservoir.

     

  6. Pour in the windshield washer fluid. Fill the reservoir to the top but stop two inches below the cap. Opening the windshield washer reservoir.
  7. Close the cap by pushing it down until it snaps back into place.Closing the windshield washer reservoir.

     

Add Windshield Washer Fluid Mazda 3 2013-2018 Step-by-step procedure on how to add windshield washer fluid on a 2013-2018 Mazda 3.