Skip to main content
When the Audi ABS light stays on, it means there is a problem with the Anti-lock Brake System (ABS). Audi ABS malfunctions can also trigger the BRAKE, ESC, or EDL lights to come on simultaneously.

Table of Contents

Under normal conditions, the ABS light will only come on for a couple of seconds when you turn on the ignition then turn off.

It is normal for the Audi ABS light to flash a few times, for example, when the vehicle starts to slip during hard braking.


You may also see ESP, ESC (Electronic Stability Control), EDL (Electronic Differential Lock), and Brake light, along with the ABS light.

What Causes Audi ABS Light to Come On? 

Common problems that cause Audi ABS light to come on include:

  • defective or dirty wheel speed sensor,
  • control module failure,
  • bad clock spring,
  • low brake fluid level,
  • blown a fuse,
  • bad ABS Pump or Module,
  • Electronic Differential Lock (EDL) problem,
  • the brake light switches are defective.

Audi ABS light may come ON if there is a problem with the Electronic Differential Lock (EDL).

What Does it Mean When Audi ABS and Brake Light Stay On?

audi abs brake light on 8P EV B6 B6 B7 B8 C4 C5 C8 C7 D2 D3 D4

If both the ABS and BRAKE light stay on, the problem could be life-threatening. The brakes may not function properly.

Immediate attention is required if ABS and BRAKE lights are both staying on. If your BRAKE warning light flashes on your instrument cluster, do not operate the vehicle. Audi brakes may not work, or functionality can be lost while driving.

What to do when the Audi ABS light stays on?

audi brake light on

If your Audi ABS stays on, the first thing you need to do is check the brake fluid level.

If the brake fluid level is normal, check the sensor on the brake fluid reservoir. The level sensor on the brake fluid reservoir may have failed.

The next step is to read codes from the ABS module.

How to Diagnose and Reset Audi ABS Light

To find out why your Audi ABS light is on, you need to read the ABS module's codes.

To do this, you will need an OBD2 scanner that can read ABS fault codes.

What you will need

  1. Park the Audi in a safe area.Audi parked to diagnose ABS light

  2. Locate the OBD-2 port under the dashboard.

    Your browser does not support the video tag.

  3. Plug the OBD-2 scanner into the OBD2 port of your Audi. Read Audi ABS BRAKE light codes
  4. Turn on the ignition. All Audi dashboard lights should turn on but do not start the engine. If your Audi has START/STOP button, press it twice without pressing on the brake pedal. Turn on Audi to read erase ABS light

  5. Turn on the scanner. Allow your Audi ABS Scan Tool to connect to the Engine Control Unit (ECU). This may take a few seconds. ABS light troulbeshooting Audi A1 A3 A4 A5 A6 A7 Q3 Q5 Q7 TT

  6. Select Audi from the menu. Next, select the Anti-lock Brake System menu. Select Audi
  7. Read codes from the ABS module.
  8. Clear codes. After you fix the problem discovered in the previous step, come back to the ABS menu and clear Audi ABS codes. Audi ABS Problem

Can Audi ABS Module Fail? 

audi abs module

ABS Control Module Failure is a common issue on Audi vehicles. It triggers ABS light to come on and can affect many models, including A4 and A6.

To fix this problem, replace the Control Module or rebuild your existing module. Another possible solution is to remove the ABS module from the vehicle and use an Audi Control Module Rebuilt Service on eBay company.