Skip to main content
This guide provides instructions on adding windshield washer fluid to an Audi vehicle. 

Table of Contents


What you will need


  1. Park your Audi on level ground, turn off the engine, and engage the Parking brakes. park audi and check washer fluid level add fluid


  2. Open the hood of your Audi by pulling the hood release under the dashboard on the driver's side. This will allow you to access the washer fluid reservoir, which is in the engine bay.

    Your browser does not support the video tag.

  3. Locate Windshield Fluid Reservoir. The washer fluid reservoir on Audi vehicles has a blue cap with the wiper symbol on top.

    How to add windshield washer fluid model 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019audi a4 windshield washer fluid reservoirLocation of windshield washer reservoir on Audi a6 windsheild washer fluid reservoirLocation of the windshield washer fluid reservoir on Audi q5 windshield washer fluidLocation of the windshield washer fluid reservoir on Audi Q5.
  4.  Lift the cap to open the reservoir. If the washer fluid is low, this is where you add windshield washer fluid.
  5. Add washer fluid until the level gets about two inches below the reservoir cap. 

Always use windshield washer fluid to avoid damaging the reservoir and the delivery lines. If your Audi has a rear wiper or headlight washing system, the same reservoir is used for both in most cases.

Adding windshield washer fluid to Audi vehicles such as the A3, A4, A6, A7, Q3, Q5, Q7, etc., is a straightforward task and should only take a few minutes.

If your Audi windshield washer fluid is low, you will get a warning message on the instrument cluster.


  • No Windshield Washer Fluid
  • Low Washer Fluid Warning
  • Low Windshield Washer Fluid message
  • 'Please Refill Washer Fluid' message on the dash.