Park the vehicle on level ground, and set the parking brakes.
Pull the hood release under the dashboard and open the hood of your BMW.
Remove the weatherstrip at the top radiator support by pulling it up.
Remove the Torx bolts. You will need a T-30 Torx bit set. Some models, such as the F30 and F31, use T27 and T25 Torx bolts.
Pull the front bumper forward and determine if there is enough room to access the back of the grille. On certain BMW models, you can reach the back of the grille and remove it easily. If you can't reach the back of the grille, proceed to the next step.
Remove the eight Torx bolts for the top radiator support and remove it.
Pull the metal plate away and place it on top of the engine. You don't need to disconnect the hood release cables.
Access the back of your BMW grille. Press down on three plastic tabs on top to unlock them.
Use a flat screwdriver to unlock the side and lower tabs.
Press the lower tabs up to unlock the bottom of the grille.
Once all the tabs are unlocked, remove the old grille by pulling it forward.
Install the new grille by pressing it on the bumper.
Reinstall the weatherstrip top radiator support, and make sure to tighten all the bolts.
That's it! Congratulations!
Changing or upgrading the front grill on a BMW is relatively easy.
I have been working on vehicles for over 20 years. In 2016, I decided to start YOUCANIC so that I can empower vehicle owners all over the world. Currently, I hold an ASE certification on G1 Automotive Maintenance and Light Repair.
BMW Front Grille Upgrade | Black Kidney Grille | DIY Guide This guide provides instructions on how to remove the OEM BMW grille. You can use these instructions to upgrade your BMW grill or change it to a black kidney grille.