This guide provides instructions on how to replace front brake pads on Chrysler 200 model years 2011, 2012, 2013, 2014.
Table of Contents
What you will need
Procedure
- Loosen the lug nut but don't remove them yet.
- Jack up your Chrysler 200 and secure it with jack stands.
- Remove the front wheel.
- Use a flathead screwdriver to press in the caliper piston.
- Use a 14mm socket to remove one of the guide pins.
- Fold out the brake caliper.
- Remove old brake pads and shims.
- Install new brake pads.
- Apply a small amount of grease where the brake pads slide on the brake caliper.
- Install the brake caliper. Apply grease to the guide pins.
- Torque guide pins to 31 Nm or 23 ft-lb.
- Install the wheel and tighten the lug nuts with the vehicle lowered to the ground.
- Pump the brake pedal a few times before starting your drive.
About Author
|
Rushit Hila, ASE Certified Mechanic I have been working on vehicles for over 20 years. In 2016, I decided to start YOUCANIC so that I can empower vehicle owners all over the world. Currently, I hold an ASE certification on G1 Automotive Maintenance and Light Repair. ⏵ Read More |
