Skip to main content
This article explains how to check and add brake fluid to the 2004-2008 Chrysler Crossfire.

Table of Contents


What you will need

  • DOT4 Brake Fluid
    • Only add brake fluid type noted on the cap of your Crossfire's brake fluid reservoir or owner's manual.
  • Work Gloves


  1. Open the hood of your Chrysler Crossfire by pulling the hood release under the dashboard.

    Your browser does not support video tag.

  2. Locate the brake fluid reservoir on the driver's side, towards the back of the engine. Clean the brake fluid reservoir with a clean cloth. diy guide add brake fluid
  3. Determine the brake fluid level by looking at the maximum and minimum marks on the side of the reservoir. How to Add brake fluid to Chrysler Crossfire 2004 2005 2006 2007 2008
  4. If the level is below the minimum level, remove the cap by turning it counter-clockwise.

    Your browser does not support video tag.

  5. Add the brake fluid until the level reaches just below the MAX mark.

These instructions apply to Crossfire, production years 2004, 2005, 2006, 2007, and 2008.