This article will discuss how to replace the convertible top module on Chrysler Crossfire.
If you are trying to reset the power top control module (AKS) you may need to disconnect the battery and unplugs the convertible top control module.
The steps below show you how to accomplish this and how to replace the convertible top control module (AKS) also known as:
If you are trying to reset the power top control module (AKS) you may need to disconnect the battery and unplugs the convertible top control module.
The steps below show you how to accomplish this and how to replace the convertible top control module (AKS) also known as:
Table of Contents
- AKS Control Unit
- Convertible Top Control Module
- PTCM - Power Top Control Module
Instructions
Steps on how to replace the convertible top module (AKS) on Chrysler Crossfire 2004, 2005, 2006, 2007.
- Disconnect the negative battery terminal.
- Open the trunk of your Chrysler Crossfire.
- Locate the Convertible Top Control Module AKS on the left side of the trunk.
- Remove the screw that holds the power top control module in place.
- Unplug the electrical connectors from the Convertible Top module.
- Install the new Convertible Top Module and reconnect the battery terminal.
About Author
|
Rushit Hila, ASE Certified Mechanic I have been working on vehicles for over 20 years. In 2016, I decided to start YOUCANIC so that I can share my expertise with vehicle owners all over the world. ⏵ Read More |
