Skip to main content
This guide provides step-by-step instructions on how to replace the convertible top motor/pump on a Chrysler Crossfire.

Table of Contents

 

Procedure

  1. Park the vehicle on level ground and set the parking brake. 
  2. Pull the trunk release and open the trunk. 
  3. The convertible pump is located on the left side of the trunk. Remove the liner on the left side of the trunk. 
  4. Locate the convertible top pump.
  5. Use an Allen key to remove the bolts that secure the hydraulic lines in place.
  6. Disconnect all the hydraulic lines.
  7. Disconnect the electrical connector. 
  8. Remove the 10mm bolt that secures the pump to the frame. 
  9. Lift and remove the old convertible top pump. 
  10. Install in reverse order. 
Chrysler Crossfire Convertible Pump Motor Replacement This guide provides step-by-step instructions on how to replace the convertible top motor/pump on a Chrysler Crossfire.