This guide provides instructions on how to change the wiper blades on a Chrysler Crossfire.
These guidelines apply to models such as Crossfire vehicles manufactured during the years 2004, 2005, 2006, 2007, and 2008.
These guidelines apply to models such as Crossfire vehicles manufactured during the years 2004, 2005, 2006, 2007, and 2008.
.jpeg?VersionId=S5bCmas6jOcG36t3NYYmrEV1d_N3LS6.)
Table of Contents
Replacing the wiper blades on your Chrysler Crossfire is easy and takes less than fifteen minutes.
What you will need
You will need new wiper blades for your Chrysler Crossfire. Below you will find the Chrysler Crossfire wiper blade size.
Procedure
- Turn off the ignition. Remove the key from your Crossfire's ignition.
- Let's start by changing the wiper blades on the driver's side of your Chrysler Crossfire.
- Lift Wiper Arm. Move the wiper blade up. The wiper blade of your Crossfire is locked in place by a small clip. Press on the clip and remove the wiper blade from the wiper arm.
- Next, replace the wiper blade on Chrysler Crossfire. You may need to tilt the wiper blade to remove it from the bracket.
- Align the new wiper blade with the wiper arm. Press the wiper blade until you hear it lock in place.
- Once the wiper blade has locked, slowly lower the wiper arm. Next, replace the wiper blade on the passenger side of your Crossfire.
About Author
|
Rushit Hila, ASE Certified Mechanic I have been working on vehicles for over 20 years. In 2016, I decided to start YOUCANIC so that I can empower vehicle owners all over the world. Currently, I hold an ASE certification on G1 Automotive Maintenance and Light Repair. ⏵ Read More |
