Skip to main content
This guide provides instructions on how to replace the third brake light on a Chrysler Crossfire. This is the LED light mounted on top of the trunk.

Table of Contents

What you will need

Procedure

  1. Park your vehicle. Engage the parking brakes.
  2. Open trunk.
  3. Remove the plastic cover under the trunk lid.
  4. Remove the emergency trunk release.
  5. Remove the T20 screw behind the emergency trunk release.
  6. Remove the screws that hold the third brake light in place.
  7. Disconnect the electrical connector.
  8. Install the new brake light on your Chrysler.

If any of the LED lights have stopped working, you will have to replace the whole brake light "bar".

Chrysler Crossfire Trunk Lid Brake Light Replacement This guide provides instructions on how to replace the third brake light on a Chrysler Crossfire. This is the LED light mounted on top of the trunk.