Skip to main content
This guide provides instructions on how to remove and change the driver window switch of the Mitsubishi Mirage G4.

Table of Contents

What you will need

Procedure

  1. Unlock the vehicle and open the driver's door.Opened door of the Mitsubishi Mirage.

     

  2. Locate the window switch on the door panel.Window switch of the driver.

     

  3. Remove the screw located by the armrest just below the door switch.The screw on the arm rest of the door panel.Removing the screw on the armrest of the door panel.

     

  4. Detach the armrest cover on the door panel use a prying tool to unlock the tabs holding it.Removing the arm rest to the door panel.

     

  5. Disconnect the cables connected to the door window switch. Press on the clip and pull it out to disconnect the cable from the window switch.Disconnecting the cables on the window switch.

     

  6. Remove the screws on the door window switch holding on to the armrest cover.The window switch on the driver's door.Use a screwdriver to remove the screws.Removing the screws on the window switch.

     

  7. Pull the window switch out of the armrest cover.Removing the driver's window switch of the Mitsubishi Mirage.

     

  8. Line up the new door switch on the armrest cover and put the screws back in.Reinstalling the screws on the new window switch.

     

  9. Connect the cables on the door panel to the door switch and push the armrest cover back in its place. Then reinstall the screw back to the armrest cover.Connecting the cables to the new window switch.Reinstalling the armrest back to the door panel.
Driver Window Switch Replacement Mitsubishi Mirage G4 This guide provides instructions on how to remove and change the driver window switch of the Mitsubishi Mirage G4.