This guide provides instructions on how to add engine coolant on Ford, also known as antifreeze.
Table of Contents
What you will need
Do not use windshield wiper fluid in the engine coolant reservoir.
Procedure
- Allow the Ford Edge to cool down for at least thirty minutes. Opening the radiator or coolant reservoir cap when the Edge engine is hot can cause serious injuries.
- Pull the hood release under the dashboard and open the hood.
- Locate the coolant reservoir. Remove the cap by turning it counterclockwise.
- Note the min and max marks on the side of the coolant reservoir.
- Add engine coolant, mixed 50% antifreeze, and 50% coolant to bring the level between the Min and Maximum marks.
Do not add coolant further than the MAX mark.
About Author
|
Rushit Hila, ASE Certified Mechanic I have been working on vehicles for over 20 years. In 2016, I decided to start YOUCANIC so that I can share my expertise with vehicle owners all over the world. ⏵ Read More |
