Ford Fusion Turn Signal & Wiper Switch Replacement DIY

What you will need

• T10 screwdriver
• Ford Fusion Combination Switch

Procedure

1. Remove the airbag and steering wheel. Click here to see the procedures on how to remove the airbag and steering wheel.
2. Remove the clock spring. Click here to see the procedures on how to remove the clock spring.
3. Remove the two T10 screws on the turn signal switch using a T10 screwdriver.

    

4. Pull the turn signal switch out of the vehicle.

    

5. Line up the new turn signal switch and push it in.

    

6. Reinstall the two T10 screws and tighten them by turning them clockwise.

    

7. Remove the two T10 screws on the wiper switch using a T10 screwdriver.

    

8. Pull the wiper switch out of the vehicle. Reinstall the T10 screw on the wiper switch.
9. Reinstall the clock spring.

    

10. Reinstall the steering wheel and airbag.