Skip to main content
This guide provides instructions on how to add windshield washer fluid on Mazda5. These guidelines apply to Mazda 5 vehicles from 2010 to 2018.

Table of Contents



  • Low windshield washer fluid level warning
  • No water can be sprayed to wash/clean the windshield.

What you will need


  1. Open the hood of your Mazda5 by pulling the hood release under the dash. This will allow you to access the washer fluid reservoir.
  2. The washer fluid reservoir on a Mazda 5 is white/translucent and has a wiper symbol on top. If your Mazda5 has a rear wiper, it is feed by the same reservoir according to Mazda 5 owners manual.
  3. Open the washer reservoir cap. How to add windshield washer fluid 5 2010 2011 2012 2013 2014 2015 2016 2017 2018
  4. Add washer fluid until the level gets about two inches below the reservoir cap.
  5. Do not use engine coolant antifreeze to mix or make windshield washer fluid. Note that on Mazda5, both front and rear wipers use the same washer fluid reservoir.