This article provides instructions on how to replace the brake wear sensor on Mercedes-Benz cars and SUV models such as C, E, S, CLK, CLS, ML, GL, GLE, GLS, GLA.
This guide is meant to help Mercedes-Benz owners who have changed the brake pads but need help replacing the brake pad wear sensor.
This guide is meant to help Mercedes-Benz owners who have changed the brake pads but need help replacing the brake pad wear sensor.
Table of Contents
What you will need
Procedure
- Jack up the vehicle. Support it with jack stands. Install new brake pads.
- Install the new brake pad wear sensor.
Insert the new sensor in the small hole on the brake pad. 
- Connect the new brake pad wear sensor.
- Restart the car and ensure the brake pad wear sensor warning is turned off. If not, inspect that the new Mercedes brake pad wear sensor is installed correctly.
Note
If you are getting a brake wear warning on the dashboard, you must replace the brake pads and rotors if they are worn.
The brake pad wear sensor should only be replaced if the brake pads are replaced.
About Author
|
Rushit Hila, ASE Certified Mechanic I have been working on vehicles for over 20 years. In 2016, I decided to start YOUCANIC so that I can empower vehicle owners all over the world. Currently, I hold an ASE certification on G1 Automotive Maintenance and Light Repair. ⏵ Read More |
