Skip to main content
Step-by-step procedure on how to replace the engine air filter on a 2013-2021 Mitsubishi Mirage G4.

Table of Contents

What you will need

Procedure

  1. Open the hood. Pull the hood release located on the left side of the driver's footwell, go to the vehicle's front, unlock the hood latch and pull the hood up.Opened hood of the Mitsubishi Mirage.

     

  2. Locate the air filter housing in the middle of the engine compartment.The Air Filter Housing of the 2020 Mitsubishi Mirage.

     

  3. Unlock the metal clips holding the outer housing of the air filter by pushing them away.Unlocking the clips holding the cover of the air filter.

     

  4. Pull the outer housing out to have access to the air filter.Pulling the outer housing of the air filter.

     

  5. Remove the old air filter by pulling it out.Removing the old air filter of the 2020 Mitsubishi Mirage.

     

  6. Line up the new air filter and push it into the housing. Make sure that the air filter is in the proper position, the same direction as the used air filter.Installing the new air filter of the 2020 Mitsubishi Mirage.

     

  7. Reinstall the outer housing of the air filter by sliding it to the right and pulling the metal clips to lock the outer housing.Reinstalling the outer air filter housing back to the vehicle.

Applicable Air Filters

  • WA10125    WIX   
  • 33-3016    K & N ENGINEERING    
  • WA610125    PARTS MASTER/CHAMPION LABORATORIES   

 

Mitsubishi Mirage Replace Engine Air Filter Step-by-step procedure on how to replace the engine air filter on a 2013-2021 Mitsubishi Mirage G4.