Nissan Intelligent Forward Collision Radar Sensor Replacement

What you will need

• Nissan Rogue Sport Intelligent Forward Collision Sensor
• Mechanic Metric Toolset
  • 10mm Socket

Procedure

1. Remove the front bumper or the front bumper grille to have access to the intelligent forward collision sensor. If you need help with this step, follow this tutorial for the removal and installation of the front bumper.
2. Disconnect the electrical connector of the sensor by pressing the clip and pulling the connector out.

    

3. Remove the three 10mm bolts holding the sensor by turning them counter-clockwise using a 10mm socket.

    

4. Remove the sensor by pulling it out from the vehicle.

    

   
5. Line up the new intelligent forward collision sensor and install the three 10mm bolts by turning them clockwise using the 10mm socket.

    

   
6. Reconnect the electrical connector of the sensor by pushing it towards its connection port.

The radar sensor mounted at the front of the radiator (behind the grill) will require programing and calibration for it to work properly.