Remove the two 7mm bolts on the door control module by using a 7mm socket.
Remove the door control module down and pull the covers out to have access to the bolts holding the side mirror.
Remove the window regulator motor or push it out to have wider access to the connector of the side mirror. If you need help with this step, click here and follow the removal process of the window regulator. This step is optional.
Disconnect the electrical connector of the side mirror. Reach inside the hole of the window regulator motor then press the clip and pull the connector out.
Remove the three 11mm bolts holding the side mirror by using an 11mm socket and ratchet.
Pull the side mirror out and guide cables out of the door.
Insert the cables of the new side mirror and line up the side mirror to the door. Then press the side mirror until it locks into place.
Reinstall the three 11mm bolts and tighten them.
Place the covers back to the door and press them in to set them into place.
Reconnect the electrical connector by pushing it towards the connection port.
Reinstall the window regulator motor. If you need help with this step, click here and follow the installation process of the window regulator motor.
I have been working on vehicles for over 20 years. In 2016, I decided to start YOUCANIC so that I can empower vehicle owners all over the world. Currently, I hold an ASE certification on G1 Automotive Maintenance and Light Repair.