Skip to main content
Step-by-step procedure on how to replace the clearance light on a 2007-2013 Honda Fit 2nd Gen.

Table of Contents

What you will need

Procedure

  1. Open the hood. Pull the hood release under the dashboard, go to the vehicle's front, unlock the hood latch, and pull the hood up. Set the hood strut to hold the hood up.The hood release of the 2011 Honda Fit.Placing the hood strut to hold the hood.

     

  2. Locate the clearance light socket behind the headlight assembly.The cable and socket of the clearance light.

     

  3. Twist the socket counterclockwise and pull it out from the headlight assembly.Removing the clearance light socket from the headlight assembly.

     

  4. Remove the light bulb from the socket by pulling it out. You do not need to twist the bulb to remove it from the socket. Pulling the light bulb out from the socket.

     

  5. Get the new light bulb, line it up to the socket, and push it in to lock it into place. If you are installing an LED bulb, you need to test it. If the bulb doesn't turn on, pull it out, rotate it 180 degrees, and reinstall it. The light bulb of the clearance light.

     

    Installing the new clearance light bulb.
  6. Line up the socket back to the headlight assembly and twist the socket clockwise to lock it in.Reinstalling the clearance light socket back to the headlight assembly.

     

  7. Check the new light bulb by switching on the headlight.Checking the new clearance light or turn signal light.

     

Replace Front Parking Clearance Light Bulb Honda Fit 2007-2013 Step-by-step procedure on how to replace the clearance light on a 2007-2013 Honda Fit 2nd Gen.