Skip to main content
Step-by-step procedure on how to replace the turn signal light on a 2007-2013 Honda Fit 2nd Gen.

Table of Contents

What you will need

Procedure

  1. Open the hood. Pull the hood release under the dashboard go to the vehicle's front. Unlock the hood latch and pull the hood up. Use the hood strut to hold the hood up.The hood release of the 2011 Honda Fit.

     

    Putting the hood strut to hold the hood up.
  2. Locate the turn signal light socket behind the headlight assembly.The socket of the turn signal light.

     

  3. Twist the socket counterclockwise and pull it out from the headlight assembly.Pulling the socket of the turn signal light.

     

  4. Remove the light bulb from the socket by pushing it down and twisting it counterclockwise.Removing the light bulb from the socket.

     

    Removing the light bulb from the socket.
  5. Get the new light bulb, push it into the socket and twist it clockwise to lock it into place.The new light bulb of the turn signal light.

     

    Installing the new turn signal light bulb.
  6. Line up the socket back to the headlight assembly and twist it clockwise to set the socket to lock position.Reinstalling the socket back to the headlight assembly.

     

  7. Check the new light bulb by switching on the turn signal.Checking the new turn signal light bulb.

     

Replace Turn Signal Light Bulb Honda Fit 2007-2013 Step-by-step procedure on how to replace the turn signal light on a 2007-2013 Honda Fit 2nd Gen.