Skip to main content
Step-by-step procedure on how to replace the window switch on a 2013-2018 Mazda 3.

Table of Contents

What you will need

Procedure

  1. Unlock the vehicle and go to the driver's seat.Going to the driver's door.

     

  2. Locate the window switch on the door panel of the vehicle.The window switch of the 2013-2018 Mazda 3 3rd Gen.

     

  3. Pop the window switch out on the bottom using a pick tool or a screwdriver and pull it back to remove it from the door panel.Removing the window switch from the door panel.

     

    Removing the window switch from the door panel.
  4. Disconnect the electrical connectors of the window switch by pushing the clip and pulling the connector out.Disconnecting the electrical connectors of the window switch.

     

    Disconnecting the electrical connectors of the window switch.
  5. Unlock the tabs holding the window switch by using a pick tool or screwdriver to unhook the tabs. Unlocking the tabs holding the window switch.

     

  6. Pull the window switch out from the cover.Removing the cover of the window switch.

     

  7. Line up the new window switch to the cover and push it in until it snaps back into place.Installing the new window switch to the cover.

     

  8. Connect the electrical connectors by pushing them to the connection port.Reconnecting the electrical connectors of the window switch.

     

  9. Line up the tab on the top of the window switch first, then push it down to lock it into place.Installing the window switch back to the door panel.

     

    Installing the window switch back to the door panel.
  10. Check the window switch by moving the windows and adjusting the side mirror.
Replace Window Switch Mazda 3 2013-2018 Step-by-step procedure on how to replace the window switch on a 2013-2018 Mazda 3.