Fault codes P0300, P0301, P0302, P0303, P0304 may be present, and Low Engine, Oil Level warning may pop up on affected vehicles.
The oversized pistons were installed mainly in many Toyota Camry. The defective pistons were manufactured by Aisin Automotive Casting in Clinton, Tennessee.
Over 1700 Toyota Camry vehicles manufactured in Kentucky, produced from December 2017 to January 2018, have been identified to be affected by this problem. Vehicles with this problem have been sold in the US and other countries. The number can be larger, and Toyota owners should monitor these conditions as other engines may have out-of-spec pistons. According to Toyota, no Lexus or Scion models have been impacted.
The A25A-FKS engines manufactured in Japan are have not been affected. Find out where your Toyota is manufactured by looking at the VIN (black) sticker on the driver's door frame, which will have the country of manufacture.
If the Toyota has been manufactured in the US, call your local dealer to find out if your vehicle has been affected by this problem. Or go to the Check Recall page and enter the VIN.
If this problem is neglected, the engine could potentially seize, causing the engine to stall while driving. If the engine stops while driving, it will obviously increase the risk of a crash.
If your Toyota Camry is part of the Safety Recall Engine May Stall Due to Incorrectly Sized Pistons NHTSA Campaign Number: 18V200000, Toyota will either replace the engine or repair it for free. If you have questions or believe your Toyota Camry may be affected by this problem, call Toyota Customer Service at 1-888-270-9371 or the headquarters at 1-800-331-4331.
- Part 573 Safety Recall Report 18V-200
- Safety Recall J0M (J1M) “ Interim Notice Certain 2018 Model Year Camry Oversized Pistons
- The engine may Stall due to Incorrectly-Sized Pistons.
- Toyota Motor Manufacturing, Kentucky, Inc. [œTMMK] Defect Information Report