Skip to main content
Step-by-step procedure on how to remove the window regulator on a 2013-2018 Mazda 3.

Table of Contents

What you will need

Procedure

 

  1. Remove the door panel.

     

  2. Disconnect the electrical connector of the door actuator by squeezing the clip and pulling the connector out.Removing the connector of the door actuator.

     

  3. Remove the bolts on the inner panel using a 10mm socket wrench.The bolts holding the inner panel.

     

  4. Remove the three screws on the inner panel using a Philips screwdriver.Removing the screws holding the window regulator.

     

  5. Remove the 10mm bolt on the door above the inner panel.Removing the 10mm bolt holding the arm of the window regulator.

     

  6. Remove the three bolts on the window regulator motor using a 10mm socket wrench. Then pull the motor out of the door.Removing the bolts on the window regulator motor.

     

  7. Go to the backside of the inner panel and pull the window regulator out of the inner panel.Removing the window regulator of the Mazda 3.Removing the window regulator of the Mazda 3.
  8. Install the new window regulator in reverse order. For more help, watch the video below. 

 

 

Window Regulator Removal Mazda 3 2013-2018 Step-by-step procedure on how to remove the window regulator on a 2013-2018 Mazda 3.