2010-18 Mazda 5 Air Conditioner A/C Freon R134a Recharge

If your Mazda 5 A/C is blowing hot air, it may be due to a small leak in the A/C system.

In this DIY guide, you will learn how to charge Mazda5 air conditioner system yourself using an air conditioner recharge kit.

What you will need

Here is what you will need to charge the A/C system on your Mazda5.

Missing content.

Instructions 

Park the car and turn off the ignition

Park your Mazda 5. Turn off the engine and get ready to add freon to your Mazda5 AC system.

Open Hood

To add refrigerant you need to open the hood of your 5. The hood release is located under the dashboard of your 5.

Locate low-pressure port

Locate the low-pressure port. This is where you add A/C refrigerant on a Mazda 5.

Connect A/C recharge kit

Remove the cap and connect your A/C hose to the charging port. Start adding refrigerant to your Mazda 5 air conditioner system.

mazda ac recharge diy video allmo allyr

Start Engine

Start the engine and let it idle.

how to charge mazda 5 ac system

Turn AC on

Turn A/C on and set it to max cold setting.

Charge your Mazda A/C

Follow the instructions as directed on your A/C recharge kit.

 

That's it!

By YOUCANIC on Sep 6, 2019

Vehicle

Disclaimer: Youcanic has made every effort to assure the accuracy of the information on this page. Neither Youcanic nor its affiliates assume responsibility for any loss or damage due to any errors, omissions, lack of information. You agree to hold Youcanic free from any liability arising out of the use of any information contained within. All pictures and references to trademarks and car names are for reference only and do not imply an association with the manufacturer. Consult your owner's manual or authorized factory manuals when performing repair procedures. By entering this site, you agree to our Terms & Conditions and Privacy Polity.