Nissan / Quest / 2011-2017 › Resources

By YOUCANIC on Apr 13, 2019

2011-2017 Nissan Quest Rear Tail Light Assembly Removal

Learn how to replace the rear tail light on Nissan Quest. This guide applies to model years 2011 2012 2013 2014 2015 2016 2017. Instructions are the same for both driver and passenger side tail light.

What you will need

Instructions

nissan quest brake light assembley replacement diy guide

  1. Park van and open the liftgate. 
  2. Remove panel from the back on the back of the tail light. 
  3. Unplug the electrical connector.
  4. Remove bolts that hold the tail light in place. 
  5. Replace the tail light.

 

Vehicle

Plain text

  • Allowed HTML tags: <a href hreflang> <em> <strong> <cite> <blockquote cite> <code> <ul type> <ol start type='1 A I'> <li> <dl> <dt> <dd> <h2 id='jump-*'> <h3 id> <h4 id> <h5 id> <h6 id>
  • No HTML tags allowed.
  • Lines and paragraphs break automatically.
  • Only images hosted on this site may be used in <img> tags.

Disclaimer: Youcanic has made every effort to assure the accuracy of the information on this page. Neither Youcanic nor its affiliates assume responsibility for any loss or damage due to any errors, omissions, lack of information. You agree to hold Youcanic free from any liability arising out of the use of any information contained within. All pictures and references to trademarks and car names are for reference only and do not imply an association with the manufacturer. Consult your owner's manual or authorized factory manuals when performing repair procedures. By entering this site, you agree to our Terms & Conditions and Privacy Polity.