Skip to main content

2013-2020 Ford Fusion Window Switch Repair Fix

How to replace the window switch on a Ford Fusion 2013-2020.

2013-2020 Ford Fusion Window Switch Repair Fix
ESTIMATED TIME 25 - 40 mins
DIY COST $ 40 - 80
DIFFICULTY Easy

What you will need

Procedure

  1. Unlock the vehicle and open the driver's door.
  2. Pop the window switch out by using a pick tool or a prying tool to pull the back part and pry out the front part of the window switch.Pulling the back part of the window switch using a pick tool.

     

    Prying out the front part of the window switch using a pick tool.
  3. Pull the window switch up and disconnect the electrical connector by pressing the clip and pulling the connector out.Disconnecting the electrical connector of the window switch.

     

  4. Remove the three T10 screws on the back of the window switch. Use a T10 screwdriver and twist it counterclockwise to remove the screws.Removing the T10 screws on the window switch.

     

  5. Pull the window switch out from the window switch cover.

     

     

  6. Line up the new window switch to the top cover of the window switch.Line up the window switch back its bracket.

     

  7. Reinstall the three T10 screws and twist them clockwise to tighten.Reinstalling the T10 screws on the window switch.

     

     

    Reinstalling the T10 screws on the window switch.
  8. Carry the window switch near the door panel and connect its electrical connector by pushing the connector towards the window switch.Connecting the electrical connector of the window switch

     

  9. Line up the window switch back to the door panel and press it in to set it into place.Pushing the window switch back to the door panel.

     

Comments

Add new comment

Plain text

Notes

Safety Tips

Auto Repair Safety Notes

 

2013-2020 Ford Fusion Window Switch Repair Fix How to replace the window switch on a Ford Fusion 2013-2020.