How to add brake fluid on a Subaru Impreza

If your Subaru brake light stays on while driving, the first thing you should do is check the brake fluid level. In this guide, you will learn how to check the brake fluid on a Subaru and add brake fluid if the level is low.

What you will need

Only use the recommend Subaru brake fluid as printed on the cap of the brake fluid reservoir.Ā 

Instructions

  1. Park your Subaru on levelĀ ground. Turn off the engine and set the parking brakes.subaru brake light on
  2. Open the hood by pulling the hood release under the dashboard.Ā 
    Video file
  3. Locate the brake fluid reservoir on the driver's side of the engine.Ā subaru brake fluid reservoir location
  4. Determine the current brake fluid level by looking at the side of the reservoir. You should be able to see the brake fluid level but if you can't shine a flashlight on the reservoir.Ā 
    Video file

How to add brake fluid Subaru

Ā 

  1. Clean the area around the cap with a clean cloth and verify the brake fluid type printed on the cap.Ā subaru brake fluid reservoir location
  2. Remove the cap by turning it counter-clockwise. Add brake fluid to bring the level between the Min and Max marks.
    Video file
  3. Do not overfill above the MAX mark.Ā Reinstall the cap. Star the engine. Pump the brake pedal. Ensure the Brake or Park light areĀ turned off.Ā add brake fluid to subaru impreza brake light on

If your Subaru brake light is on while driving stop immediately and check the brake fluid level. If the brake fluid level is below the MIN mark, add brake fluid to bring the level between the Min and Max marks. Do not drive a vehicle with the brake light on.Ā 

Ā 

Vehicle

Feedback

šŸ’” Help us improve this article by providing feedback.Ā No registration is required.Ā 

Need Help?

šŸ’­ Ask car questions in ourĀ Car Forum.

Add new comment