How to add brake fluid, check level 2004-2008 Chrysler Crossfire

Learn how to check and add brake fluid level on 2004-2008 Chrysler Crossfire. These instructions apply to Crossfire, production years 2004 2005 2006 2007 2008.

What you will need




Below you will find step by step directions and video clips to help you check or add brake fluid to your Crossfire.

Open Hood

Open the hood of your Chrysler Crossfire by pulling the hood release under the dashboard.

Locate Brake Fluid Reservoir

Locate the brake fluid reservoir on driver's side, towards the back of the engine. Clean the brake fluid reservoir with clean cloth.

diy guide add brake fluid

Determine Low/Max level

Check brake fluid level on Chrysler Crossfire. Determine the brake fluid level by looking at the maximum and minimum marks on the side of the reservoir.

How to Add brake fluid to Chrysler Crossfire 2004 2005 2006 2007 2008

Remove cap

If the level is below the minimum level, remove the cap by turning it counter-clockwise. 

Add Brake Fluid

Add the brake fluid until the level reaches just below the MAX mark. 


  • Do not drive a vehicle that has the brake light on. 
  • If the brake fluid level is below the minimum or MIN mark on the brake fluid reservoir, do no drive the car. Check the system for any major brake fluid leaks. Driving with no brake fluid is extremely dangerous. Your car may not stop when you apply the brakes.
  • Brake fluid is poisonous and must be carefully marked and stored in a safe place, out of the reach of children and animals.

Things to keep in mind when adding brake fluid

  • Clean the brake fluid cap with a clean cloth before you remove the cap.
  • Do not allow the brake fluid to drop on your car's paint. Brake fluid can damage car paint. 
  • Only use the recommended brake fluid type which is printed on top of the brake fluid cap. 
  • Wash your hands as soon as possible if you get brake fluid on them.
  • If the brake fluid level is low, the BRAKE and ABS (Anti-lock Braking System) warning light may turn on.
  • It is recommended that you check the brake fluid level once a month.
  • When the ignition is on, the brake light is initially ON if you have set the parking/emergency brakes. The brake warning should turn off once the parking brake is released and you start to drive. 
  • If the LOW BRAKE FLUID warning or the BRAKE LIGHT stay on as you are driving stop the vehicle immediately and check the brake fluid level.

By YOUCANIC on Jan 9, 2019


Disclaimer: Youcanic has made every effort to assure the accuracy of the information on this page. Neither Youcanic nor its affiliates assume responsibility for any loss or damage due to any errors, omissions, lack of information. You agree to hold Youcanic free from any liability arising out of the use of any information contained within. All pictures and references to trademarks and car names are for reference only and do not imply an association with the manufacturer. Consult your owner's manual or authorized factory manuals when performing repair procedures. By entering this site, you agree to our Terms & Conditions and Privacy Polity.