How to add windshield washer fluid to Chevrolet vehicles

In this guide, you will learn how to add windshield washer fluid to Chevrolet vehicles.

Adding windshield washer fluid to a Chevrolet is very easy and takes only a few minutes. If your vehicle washer fluid is low you will get a warning message on your instrument cluster.

What you will need

Instructions

Open Hood

Open the hood of your vehicle to access the washer fluid reservoir.

Locate Windshield Fluid Reservoir

The washer fluid reservoir on Chevrolet is white or translucent and has a wiper symbol on top. See item 6. 

Open Reservoir Cap

chevrolet windshield wiper location

Open the washer reservoir cap by lifting it up. On most Chevrolet vehicles the window fluid reservoir is located on the driver side towards the front and behind the headlight. 

Add Windshield Washer Fluid

Add washer fluid until the level gets about two inches below the reservoir cap. 

This guide will help owners of Chevrolet models such as Spark, Sonic, Bolt, Volt, Cruze, Malibu, Impala, Camaro, Corvette, City Express, Trax, Equinox, Traverse, Tahoe, Suburban, Colorado, Silverado, Sonic, Blazer, Astro, HHR, Uplander, Avalanche etc learn how to add windshield washer fluid.

Symptoms

Warning message on Chevrolet instrument cluster or Driver Information Center (DIC) stating:

 

By YOUCANIC on Jul 4, 2019

Vehicle

Disclaimer: Youcanic has made every effort to assure the accuracy of the information on this page. Neither Youcanic nor its affiliates assume responsibility for any loss or damage due to any errors, omissions, lack of information. You agree to hold Youcanic free from any liability arising out of the use of any information contained within. All pictures and references to trademarks and car names are for reference only and do not imply an association with the manufacturer. Consult your owner's manual or authorized factory manuals when performing repair procedures. By entering this site, you agree to our Terms & Conditions and Privacy Polity.