How to add windshield washer fluid Mazda 5 2010-18

In this guide, you will learn how to add windshield washer fluid on Mazda5. These instructions apply to Mazda 5 manufactured from 2010 to 2018.

As per the owner's manual, Mazda recommends that you use washer fluid made with antifreeze.



What you will need


  • None


Open Hood

Open the hood of your Mazda5 by pulling the hood release under the dash. This will allow you to access the washer fluid reservoir.

Locate Windshield Fluid Reservoir

The washer fluid reservoir on Mazda 5 is white/translucent and has a wiper symbol on top. If your Mazda5 has a rear wiper it is feed by the same reservoir according to Mazda 5 owners manual.

Open reservoir cap

Open the washer reservoir cap.

 How to add windshield washer fluid 5 2010 2011 2012 2013 2014 2015 2016 2017 2018

Add windshield washer fluid

Add washer fluid until the level gets about two inches below the reservoir cap.

Do not use engine coolant antifreeze to mix or make windshield washer fluid. Note that on Mazda5 both front and rear wipers use the same washer fluid reservoir.



💡 Help us improve this article by providing feedback. No registration is required. 

Need Help?

💭 Ask car questions in our Car Forum.

Add new comment