Skip to main content

Air Filter Replacement Mitsubishi Mirage Engine 2013-2021

Step-by-step procedure on how to replace the engine air filter on a 2013-2021 Mitsubishi Mirage G4.

ESTIMATED TIME 10 - 15 mins
DIY COST $ 20 - 60
DIFFICULTY Very Easy

Watch Video

What you will need

Procedure

  1. Open the hood. Pull the hood release located on the left side of the driver's footwell, go to the vehicle's front, unlock the hood latch and pull the hood up.Opened hood of the Mitsubishi Mirage.

     

  2. Locate the air filter housing in the middle of the engine compartment.The Air Filter Housing of the 2020 Mitsubishi Mirage.

     

  3. Unlock the metal clips holding the outer housing of the air filter by pushing them away.Unlocking the clips holding the cover of the air filter.

     

  4. Pull the outer housing out to have access to the air filter.Pulling the outer housing of the air filter.

     

  5. Remove the old air filter by pulling it out.Removing the old air filter of the 2020 Mitsubishi Mirage.

     

  6. Line up the new air filter and push it into the housing. Make sure that the air filter is in the proper position, the same direction as the used air filter.Installing the new air filter of the 2020 Mitsubishi Mirage.

     

  7. Reinstall the outer housing of the air filter by sliding it to the right and pulling the metal clips to lock the outer housing.Reinstalling the outer air filter housing back to the vehicle.

Applicable Air Filters

 

Notes

Engine

Air Filter Replacement Mitsubishi Mirage Engine 2013-2021 Step-by-step procedure on how to replace the engine air filter on a 2013-2021 Mitsubishi Mirage G4.