Skip to main content

Cadillac Read & Clear Fault Codes

This guide provides instructions on how you can read Cadillac fault codes using an OBD-II scanner. 

Use this method to diagnose a dashboard warning light or message on the DIC. 

Cadillac  Read & Clear Fault Codes
ESTIMATED TIME
DIY COST
DIFFICULTY

 

What you will need

Procedure

  1. Park the Cadillac on level ground and set the parking brakes. How to read Cadillac fault codes
  2. Open the driver's door and locate the OBD-2 port.

    Your browser does not support the video tag.

  3. Plug your scanner into the OBD2 port Plug scanner into Cadillac port for diy troubleshooting
  4. Turn on the ignition by turning the key to position II. If your Cadillac has START/STOP feature, press the button without pressing the brake pedal. Turn ON Cadillac ignition to read and clear codes with a scanner
  5. Allow your scanner to turn on. Follow the promptings on your scanner to read fault codes.

Diagnose Cadillac ABS (Anti-Lock Braking System)

Watch this video to learn how to use an ABS scanner to retrieve Cadillac Anti-lock Brake SystemBrake System codes.

Diagnose Cadillac Airbag Warning Light

Watch this video to learn how to use a multi-system scanner to troubleshoot a Cadillac Airbag Light that is on.

Basic OBD2 scanners can only be used to retrieve fault codes from the Engine Control Unit (ECU). Those are faults that trigger the Check Engine warning light on the dashboard.

To diagnose ABS and Airbag/SRS warning lights, a multi-system OBD-II scanner is needed. Here are some popular scanners you can use:

The procedure for reading Cadillac fault codes is similar, regardless of which scanner you are using.

When the Check Engine Light (CEL) or any other warning light such as ABS, Airbag, TPMS turn on or you get a warning message on Driver Information Center (DIC), a Diagnostic Trouble Code (DTC) gets stored in the corresponding control module.

Comments

Add new comment

Plain text

Notes

Safety Tips

Auto Repair Safety Notes