Mazda / Mazda 5 / 2010-2018 › Resources

By YOUCANIC on Jan 8, 2019

How to change front turn signal bulb Mazda5 2010-18

Learn how to replace the front turn signal light bulb on Mazda 5 made from 2010 through 2018. The instructions are the same for both driver's and passenger's side turn signal light bulb. The turn signal may also be referred to as the blinker. 

What you will need


Park Vehicle

Park your Mazda 5 on level ground. Turn off the engine, move the shifter to Park and get ready to change the front turn signal light bulb on your Mazda 5.

Open Hood

Open the hood by pulling the hood release under the dashboard. 

Identify Bulb

Determine the location of the bulb that has burned out.

how to replace turn signal on a Mazda 5 2010 2011 2012 2013 2014 2015 2016 2017 2018

Access turn signal socket

Access the back of the Mazda5 headlight. In some cases, it may be easier to remove the headlight but for Mazda 5 it is not necessary. 

Remove turn signal socket

Remove the socket by turning it counter clockwise.

Remove Bulb

Replace the light bulb.

Install new bulb

Reinstall the turn signal socket into the headlight assembly of your Mazda

If the front turn signal doesn't work after you install a new bulb, check the fuses.

The fuse for front turn signal lights is located in the engine compartment fuse box. Check the 10A fuse market as HAZARD. Fuse position is 24.


Plain text

  • Allowed HTML tags: <a href hreflang> <em> <strong> <cite> <blockquote cite> <code> <ul type> <ol start type='1 A I'> <li> <dl> <dt> <dd> <h2 id='jump-*'> <h3 id> <h4 id> <h5 id> <h6 id>
  • No HTML tags allowed.
  • Lines and paragraphs break automatically.
  • Only images hosted on this site may be used in <img> tags.