Nissan / Quest / 2011-2017 › Resources

By YOUCANIC on Jun 17, 2019

How to change Front Turn Signal Nissan Quest 2011-2017

Learn how to change front turn signal light bulb on Nissan Quest 2011-2017.

Replacing the turn signal is simple and takes less than 10 minutes.

This guide applies to model years: 2011 2012 2013 2014 2015 2016 2017

What you will need

Nissan Quest Front Turn Signal Light Bulb,


Step 1

Park your Nissan Quest on a safe area and set the parking brakes. Turn off the engine and get ready to change the front turn signal light bulb.

Nissan Quest turn signal blinger light bulb replacement

Step 2

To change the turn signal on your Quest you need to open the hood. The hood release is located under the dashboard of your Quest.

Step 3

Look at the headlight of your Nissan Quest and identify the turn signal light bulb.

how to replace turn signal Nissan Quest 2011 2012 2013 2014 2015 2016 2017

Step 4

Access the back of the headlight. In some cases, it may be easier to remove the headlight. It is not always necessary. Remove the black plastic cover to access the turn signal light bulb.

How to change front turn signal Nissan Quest 2011 2012 2013 2014 2015 2016 2017

Step 5

Remove the turn signal socket by turning it counterclockwise.

Step 6

Plug the electrical connector. Turn on the ignition and make sure the turn signal works.


  1. Do not use extreme force to remove light bulb as the glass may break and cause injuries. 
  2. Follow vehicle recommendations on the type of light bulb and wattage to use. 
  3. Use gloves when handling light bulbs. Oil from our hands can be transferred to bulb surfaces.
  4. Carefully dispose old light bulbs. It is recommended to wrap them first in thick paper to prevent injury or cuts in case the glass breaks

Plain text

  • Allowed HTML tags: <a href hreflang> <em> <strong> <cite> <blockquote cite> <code> <ul type> <ol start type='1 A I'> <li> <dl> <dt> <dd> <h2 id='jump-*'> <h3 id> <h4 id> <h5 id> <h6 id>
  • No HTML tags allowed.
  • Lines and paragraphs break automatically.
  • Only images hosted on this site may be used in <img> tags.