How to change Hyundai Key Fob Battery

Instructions on how to replace the key fob (keyless) remote battery on Hyundai Elantra, Azera, Sonata, Genesis, Accent, Equus, Santa Fe, Sedona, Tucson, Veloster. 

Watch how to change the battery on this Hyundai remote. Note that you will need a CR2032 replacement battery for this remote. This is the three button keyfob used on models such as Hyundai Elantra, Sonata etc. 

  1. Use a flat head screwdriver to pry open the case.
  2. Slide out the old battery.
  3. Insert the new battery making sure the positive (+) side of the battery is oriented the same way. 
  4. Close the key fob housing. 


Jim Moore, 2019-08-04

Fantastic! I had NO SCREWS which most other instructions operate under. (2012 Tuscon)

By YOUCANIC on Apr 18, 2019


Disclaimer: Youcanic has made every effort to assure the accuracy of the information on this page. Neither Youcanic nor its affiliates assume responsibility for any loss or damage due to any errors, omissions, lack of information. You agree to hold Youcanic free from any liability arising out of the use of any information contained within. All pictures and references to trademarks and car names are for reference only and do not imply an association with the manufacturer. Consult your owner's manual or authorized factory manuals when performing repair procedures. By entering this site, you agree to our Terms & Conditions and Privacy Polity.