How to change Mercedes-Benz Brake Wear Sensor

In this article, you will find instructions on how to replace the brake wear sensor on Mercedes-Benz cars and SUV models such as C, E, S, CLK, CLS, ML, GL, GLE, GLS, GLA. 

This guide is meant to help Mercedes-Benz owners who have changed the brake pads but need help with replacing the brake pad wear sensor. 


If you are getting brake wear warning on the dashboard, you must replace the brake pads and rotors if necessary.

Brake pad wear sensor should only be replaced if the brake pads are replaced. 

What you will need


  1. Jack up the vehicle. Support it with jack stands. Install new brake pads. installed new mercedes brake pads
  2. Install the new brake pad wear sensor.mercedes brake pad wear sensor Insert the new sensor in the small hole on the brake pad. mercedes brake pad wear sensor
  3. Connect the new brake pad wear sensor. connect new mercedes brake wear sensor
  4. Restart the car and ensure the brake pad wear sensor warning is turned off. If not, inspect that the new Mercedes brake pad wear sensor is installed correctly. replace mercedes brake pad wear sensor

By YOUCANIC on Apr 21, 2019


Disclaimer: Youcanic has made every effort to assure the accuracy of the information on this page. Neither Youcanic nor its affiliates assume responsibility for any loss or damage due to any errors, omissions, lack of information. You agree to hold Youcanic free from any liability arising out of the use of any information contained within. All pictures and references to trademarks and car names are for reference only and do not imply an association with the manufacturer. Consult your owner's manual or authorized factory manuals when performing repair procedures. By entering this site, you agree to our Terms & Conditions and Privacy Polity.