How to Check Add Power Steering Fluid Kia Sedona 2015-2018

2015 2016 2017 2018 Kia Sedona Check Add Power Steering Fluid

Learn how to check and add Power Steering Fluid to Kia Sedona vans from 2015 through 2019. Checking the power steering fluid on a Kia Sedona is easy and takes less than five minutes. 

What you will need

Instructions

Open hood

Locate the hood release underneath the dash. Pull the lever until you hear the hood pop open. Next, you need to release the hood safety latch at the front of the hood.

Locate power steering pump

Next, you need to locate the power steering pump on your Kia Sedona In this case, the power steering pump is located on the driver/passenger side of the engine bay.

Remove power steering cap

Once you locate the power steering reservoir on your Kia Sedona, remove the cap. Inspect current condition of the the power steering pump.

how to add power steering fluid Kia Sedona ALLYR 2015, 2016, 2017, 2018 Kia Sedona Sedona

Determine Low and High marks

If you look carefully on the side of the power steering fluid or the cap dipstick you will notice a Low and Max level for the power steering fluid. Determine if the current power steering level is below the minimum level.

 2015, 2016, 2017, 2018 Kia Sedona Sedona

Add power steering fluid

Adding power steering fluid on 2015-2018 Kia Sedona is very easy. Here are some general instructions on how to add power steering fluid on a car. Instructions on how to add power steering fluid on a car.

Vehicle

Feedback

💡 Help us improve this article by providing feedback. No registration is required. 

Need Help?

💭 Ask car questions in our Car Forum.

Add new comment