How to check coolant level, Add antifreeze Nissan Quest 2011-2017

Learn how to check and add coolant to Nissan Quest.


  • Engine coolant level warning
  • Engine overheating
  • Coolant level low
  • Antifreeze smell from the engine bay

What you will need

Nissan Quest engine cooling system is filled at the factory with a pre-diluted mixture of 50% Genuine NISSAN Long Life Antifreeze Coolant (blue) and 50% water


Do not continue to operate your Nissan Quest if the engine is overheating or the high engine temperature light comes on in your Nissan.

Open Hood

Locate the hood release underneath the dashboard of your Nissan Quest Pull the lever until you hear the Nissan hood pop open. Next, you need to release the hood safety latch at the front of your Quest.

Locate Coolant Reservoir

Locate the coolant reservoir (tank) on your Nissan. This is the location where you add engine coolant reservoir is on a Nissan Quest. On a Quest, the coolant reservoir is located on the passenger side of the engine.

How to check coolant or add 2011 2012 2013 2014 2015 2016 2017 11/15/2017

Check Coolant Level

Look at the coolant reservoir tank and note the low and high level. If the level is below the minimum mark you will need to add coolant.

Remove Cap

Remove coolant reservoir cap from your Quest.

Add engine coolant antifreeze Nissan Quest 2011 2012 2013 2014 2015 2016 2017

Add Coolant / Antifreeze

Add engine coolant/antifreeze. Only add the recommend Nissan coolant

By YOUCANIC on May 31, 2019


Disclaimer: Youcanic has made every effort to assure the accuracy of the information on this page. Neither Youcanic nor its affiliates assume responsibility for any loss or damage due to any errors, omissions, lack of information. You agree to hold Youcanic free from any liability arising out of the use of any information contained within. All pictures and references to trademarks and car names are for reference only and do not imply an association with the manufacturer. Consult your owner's manual or authorized factory manuals when performing repair procedures. By entering this site, you agree to our Terms & Conditions and Privacy Polity.