Chrysler Crossfire Add Brake Fluid & Check Level

Procedure

1. Open the hood of your Chrysler Crossfire by pulling the hood release under the dashboard.

   Your browser does not support video tag.

2. Locate the brake fluid reservoir on the driver's side, towards the back of the engine. Clean the brake fluid reservoir with a clean cloth. 
3. Determine the brake fluid level by looking at the maximum and minimum marks on the side of the reservoir. 
4. If the level is below the minimum level, remove the cap by turning it counter-clockwise.

   Your browser does not support video tag.

5. Add the brake fluid until the level reaches just below the MAX mark.

These instructions apply to Crossfire, production years 2004, 2005, 2006, 2007, and 2008.