Chrysler Crossfire Disable Passenger Airbag

If an infant seat or child will be in the passenger seat, you need to turn off the passenger airbag. The passenger seat does not have a mat sensor, and the airbag needs to be turned off manually. Follow these instructions to turn off the passenger airbag on or off.

Instructions

  1. Open the passenger door
  2. Locate the airbag on/off switch on the side of the airbag.
  3. Turn the switch to off.
  4. Passenger airbag will not deploy in case of an accident. Passenger airbag off light will illuminate.
  5. Remove key from the switch.

Comments

Chris, 2019-05-21

My Crossfire is a 2005 model and their is no airbag on/off option, switch or key to turn to disable the airbag.

By YOUCANIC on May 7, 2019

Vehicle

Disclaimer: Youcanic has made every effort to assure the accuracy of the information on this page. Neither Youcanic nor its affiliates assume responsibility for any loss or damage due to any errors, omissions, lack of information. You agree to hold Youcanic free from any liability arising out of the use of any information contained within. All pictures and references to trademarks and car names are for reference only and do not imply an association with the manufacturer. Consult your owner's manual or authorized factory manuals when performing repair procedures. By entering this site, you agree to our Terms & Conditions and Privacy Polity.