Chrysler Crossfire Trunk Lid Brake Light Replacement

What you will need

• Chrysler Crossfire Trunk Brake Light
• Torx Bit Set
• Mechanic Toolset Metric

Procedure

1. Park your vehicle. Engage the parking brakes.
2. Open trunk.
3. Remove the plastic cover under the trunk lid.
4. Remove the emergency trunk release.
5. Remove the T20 screw behind the emergency trunk release.
6. Remove the screws that hold the third brake light in place.
7. Disconnect the electrical connector.
8. Install the new brake light on your Chrysler.

If any of the LED lights have stopped working, you will have to replace the whole brake light "bar".