Skip to main content

Ford Fusion Window Regulator Replacement Guide

How to replace the window regulator and its motor on a Ford Fusion 2013-2020.

Ford Fusion Window Regulator Replacement Guide
ESTIMATED TIME 45 mins - 1.5 hours
DIY COST $ 50 - 150
DIFFICULTY Intermediate

What you will need

Procedure

  1. Remove the door panel. If you need help with this step, follow these procedures for the removal of the door panel.

     

  2. Remove the window. If you need help with this step, follow these procedures for the window removal process.

     

  3. Remove the cover of the window regulator motor by pulling it out using a prying tool or pick tool.Removing the cover of the window regulator motor.

     

  4. Disconnect the electrical connector of the motor by pressing the clip and pulling the connector out.Disconnecting the electrical connector of the window regulator motor.

     

  5. Remove the five 10mm bolts holding the door panel by using a 10mm nut driver or a 10mm socket and twisting it counterclockwise to loosen.Removing the five 10mm bolts holding the window regulator and motor.

     

  6. Reach inside the door and carry the window regulator and the motor out of the vehicle.Carrying the window regulator and motor out of the door.

     

     

     

    Carrying the window regulator and motor out of the door.
  7. To replace the motor, remove the three T30 bolts and pull the motor out of the window regulator. Use a T30 Torx bit socket to remove the bolts.The T30 bolts holding the window regulator motor.

     

  8. Line up the new motor to the window regulator and reinstall the three T30 bolts.

     

  9. Install the window regulator and motor to the door. Place the piece inside the door and line it up to its proper position.Installing the new window regulator and motor of the Ford Fusion.

     

    Installing the new window regulator and motor of the Ford Fusion.
  10. Reinstall the five 10mm bolts holding the whole window regulator piece. Twist the bolts clockwise to tighten.

     

  11. Reconnect the electrical connector of the motor by pushing the connector into the motor.Reconnecting the electrical connector of the window regulator motor.

     

  12. Line up the cover of the window regulator motor and press it in until it snaps into place.Reinstalling the cover of the window regulator motor.

     

  13. Reinstall the window. If you need help with this step, follow these procedures for the window installation process.Reinstalling the window of the Ford Fusion.

     

  14. Reinstall the door panel. If you need help with this step, follow these procedures for the installation of the door panel.

Comments

Add new comment

Plain text

Notes

Safety Tips

Auto Repair Safety Notes

 

Ford Fusion Window Regulator Replacement Guide How to replace the window regulator and its motor on a Ford Fusion 2013-2020.